So you want to build your own Bag Toss (a.k.a. Bean Bag Game or Cornhole) set? As much as we would like your business, if you want to build your own, we support that. Below are the dimensions for Bag Toss 2 in inches. The slot is 6.00in x 2.75in with 1.0in corner radius. It took some trial and error to find the right size as we wanted to make it hard to get it in but not impossible. A novice might get it in the slot once or twice a game, but a pro might get it in once a round. The board shown below is the tailgate size which is 3ftx2ft. If you want the 4ftx2ft size, simply add a foot on the bottom and keep the slot and the hole in the same position relative to the top of the board. Before you DIY, consider the quality and workmanship of our boards. Buy a set from us today and spend that free time of yours planning your next BBQ.
4x2 Long Board Instructions
3x2 Tailgate Instructions
These instructions on building your own set are provided by CornholePlayers.net
For coatings, check your local paint shop for outdoor grade water based polyurethane. It is milky white and dries clear. Practice on test peices as there are different methods of application. We like to roll it on heavy.
The design of Bag Toss 2 is a trademark of Vorticy Sports, Inc. and is currently patent pending. An individual may use this design for building their own game. This design is not to be used commercially without a written agreement with Vorticy Sports, Inc. Please contact us for commercial use.
If you have questions or comments, use our contact form.